Tag Archives: cravats

18th Century Style Jabot or Cravat

The Purim schpiel was based on Hamilton, and the costumes Joe and I altered/reused/repurposed/added to were 18th Century style, more specifically Revolutionary War style.  From scratch I made several jabots or cravats that I copied from one I found that buttons on to a blouse.  They aren’t 100% authentic by far, but if you need that quick final touch on a men’s Revulutionary War or French court or basically 1740s to 1780 costume, below are photos and instructions.

You’ll need some white or ivory lace or eyelet lace trim that’s already gathered up (as opposed to the totally flat kind, 1 3/4″ to 2 1/4″ wide, and probably only about 60″ of it, as well as less than a yard of white or ivory cotton, quilting weight or lighter, matching thread, and either some velcro or snaps.


Here is the jabot from the original blouse.


They sewed a ruffle to a rectangular base of the same fabric.


The back, where you can see it was sewn in a zigzag pattern.

First cut a neck band 5 or 6″ wide and the wearer’s neck measurement long plus 2 1/2″ for overlap and so it isn’t skin tight (people’s necks are from 13 or 14″ to 17 or 18″). Cut a base for the lace 7″ wide and 8″ tall.

Make a narrow hem on all 4 sides of the neck band.  Fold the base in half lengthwise, stitch around the bottom and long side, trim corners, turn right side out, and press.


Starting at the bottom of the base, sew the lace trim in a diagonal pattern all the way across the base and work your way up to the top.  Fold extra under at the bottom so the raw edge doesn’t stick out.  I didn’t finish my edge, but it’ll look nicer folded under.  At the top go straight across with a bit folded under.  Use the very top because that’s the seam allowance for when you attach it to the neck band.


Tack the top fold of lace to the base because it will want to flip up when it’s worn.


Here are some photos of the finished lace base part.



And the kinds of trim you can use (also regular lace trim).

Gather the ends of the neck band and two places between the ends.  When you look at paintings and fashion plates of men’s costume of the time, the part around their necks usually looks like a scarf that’s wider than their necks are tall.  Sew the velcro or snaps to the ends, overlapping the ends.  Then sew the lace and base piece to the center of the bottom long side of the neck band.


How wide the trim is affects how much you’ll need.  Wider trim uses less, narrower trim uses more.


While not perfectly authentic, it will work if you’re in a hurry.  I think it took me less than 30 minutes to cut and sew one.

Comments, questions, suggestions?  Yes, please!  Thanks for reading!


Leave a comment

Filed under Garments

Another cravat

I just made another cravat.  It’s more complicated than the ones in one of my previous entries, but not by much.  I’ll show you photos then tell you what I did to make it.

The cravat I just made

The cravat I just made


A close up view of the ends of the cravat


Another view of the cravat I just made

The base of the cravat is a piece of Chinese silk that is 60″ long and 12″ wide.  The gold flowers on navy and royal blue is scraps from a sari from India.  The rest of the sari was cut into a bodice and over skirt for one of my models for a fashion and variety show in July.  The model who is wearing this cravat is also wearing a duppioni silk vest that is a light, cool blue with a navy blue velveteen collar.  These blues match the vest.

After cutting the Chinese silk, I cut a piece of fusible interfacing the same size and fused it to the silk.  I had to piece together the border scraps to make a strip that was long enough, so I did that, then laid the border on the silk.  I basted the selvage edge of the border to the edge of the silk then sewed the other side of the border to the silk with a zigzag stitch.  I made it a little narrower than the default setting and changed the length to 0.5 so the stitches would cover up the cut edge of the border.  I pressed the whole thing.

I folded the silk so that the other long edge of the rectangle met the long edge I had just sewn the border to.  With right sides together, I stitched that long edge and the ends, leaving a space on the long edge a bit wider than my hand so I could easily turn the cravat right side out.  I clipped the corners and turned it right side out.  I pressed it with the border side down so that I could pull the edges a bit toward the non-border side.  I stitched the opening closed then edge stitched all the way around the cravat 1/8″ from the edge.  Then I pressed it again.

[5/21/14]: I forgot to add that like in the other cravat entry above, I folded the cravat the long way so it was a few layers thick and sewed it down.  This is just a bit off exact half and is long enough for around the back of the neck.  You might not want to do it if you want your cravat to be more free flowing or like a scarf, but this is so that this part can nicely sit at the back of the neck before being wrapped.  Here’s a photo:

Folding and stitching for the back of the neck

Folding and stitching for the back of the neck


Filed under Garments